Easy assembly that does not require additional tools. Installation of accessories with a clamp or convenient to use T type bolts. Adjustable length (up to 10 cm). Maximum load capacity: 75 kg / 165 lbs. Roof rack rails crossbars Turtle Air-2.Aluminium (Crossbars) / ABS Plastic with metal clamps (Brackets). 2 Aluminium Crossbars + 4 ABS Plastic Mounting Brackets. 75 kg / 165 lbs. For integrated and standard (RAISED) side roof rails. During installation it is important to follow the recommendations below. Begin the installation by connecting the brackets to the aluminium beams. Only the fully inserted beam is locked into the mount. Adjust the distance of the beam mounts to the spacing of the rails. Note that the dimensions may be different at the front and rear of the vehicle. When two different lengths of rack bars are included, in most cases the longer rack bar will be mounted to the front of the vehicle. Place the rack in the correct position on the vehicle's rails. Use an Allen wrench to tighten the mounting clamps to secure the bar to the railing. Make sure each foot is properly mounted on the railing. Using the wrench, tighten the spacing adjustment screw to lock the beams.
After tightening, make sure the rails do not move between the mounts. After tightening and checking for proper installation, replace the caps with the locks. Complete the roof rack installation by turning the key to lock the protective tab. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Racks & Cargo Carriers\Roof Racks & Cross Bars".The seller is "chromemaster_eu" and is located in this country: PL. This item can be shipped worldwide.